AES-100 User’s Guide

Figure 13-3 Database Edit Dialog

7.Select Normal Bootp to enable normal BOOTP/TFTP functions.

Figure 13-4 Enable BOOTP/TFTP

8.Restart the ADSL Networking Module and press any key within three seconds to get the following screen.

SDRAM Testing ...

Mac address 00:A0:C5:12:34:56

Press any key within 3 seconds to enter debug mode

.............................

Figure 13-5 Enter Debug Mode

9.Press any key at the “Press any key within 3 seconds to enter debug mode

………………” message, to enter the debug mode.

10.Enter atnb at the ADSL Networking Module boot console.

13-4

Firmware Upload and Recovery