ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge

2.3Resetting the ZyAIR

If you forget your password or cannot access the ZyAIR, you will need to reload the factory-default configuration file or use the RESET button on the top panel of the ZyAIR. Uploading this configuration file replaces the current configuration file with the factory-default configuration file. This means that you will lose all configurations that you had previously. The password will be reset to “1234”, also.

2.3.1 Method of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in three ways:

1.Use the RESET button on the top panel of the ZyAIR to upload the default configuration file (hold this button in for about 10 seconds or until the Link LED turns red). Use this method for cases when the password or IP address of the ZyAIR is not known.

2.Use the web configurator to restore defaults (refer to the Maintenance chapter).

3.Transfer the configuration file to your ZyAIR using FTP. See the part on SMT configuration for more information.

Introducing the Web Configurator

2-3