ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge

 

 

Table 7-3 Channel Usage

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

 

“Network mode” in this screen refers to your wireless LAN infrastructure (refer to the

 

 

Network Mode

Wireless LAN chapter) and WEP setup.

 

 

Network modes are: Infra (same as an extended service set ESS), Infra, WEP (WEP

 

 

 

encryption is enabled), Ad-Hoc(same as an independent basic service set IBSS), or Ad-

 

 

 

Hoc, WEP.

 

 

Refresh

Click Refresh to reload the screen.

 

 

 

 

 

7.4F/W Upload Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin" extension, e.g., "zyair.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File Maintenance chapter for upgrading firmware using FTP/TFTP commands.

Click F/W UPLOAD under MAINTENANCE. Follow the instructions in this screen to upload firmware to your ZyAIR.

Figure 7-4 Firmware Upload

The following table describes the labels in this screen.

Maintenance

7-5