ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Host= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 11-2 Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

Table 11-1 Menu 22 SNMP Configuration

FIELD

DESCRIPTION

EXAMPLE

 

 

 

SNMP:

 

 

 

 

 

Get Community

Type the Get Community, which is the password for the incoming

public

 

Get- and GetNext requests from the management station.

 

Set Community

Type the Set Community, which is the password for incoming Set

public

 

requests from the management station.

 

 

 

 

Trusted Host

If you enter a trusted host, your ZyAIR will only respond to SNMP

0.0.0.0

 

messages from this address. A blank (default) field means your

 

 

ZyAIR will respond to all SNMP messages it receives, regardless

 

 

of source.

 

 

 

 

Trap:

 

 

 

 

 

Community

Type the trap community, which is the password sent with each

public

 

trap to the SNMP manager.

 

Destination

Type the IP address of the station to send your SNMP traps to.

0.0.0.0

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

11.4 SNMP Traps

The ZyAIR will send traps to the SNMP manager when any one of the following events occurs:

SNMP Configuration

11-3