ZyAIR
The following table describes the fields in this menu.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Name | Displays the system name of your ZyAIR. This information can be changed in |
| Menu 1 – General Setup. |
Routing | Refers to the routing protocol used. |
|
|
ZyNOS F/W | Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version. |
Version | ZyNOS is a registered trademark of ZyXEL Communications Corporation. |
|
|
Country Code | Refers to the country code of the firmware. |
|
|
LAN |
|
|
|
Ethernet Address | Refers to the Ethernet MAC (Media Access Control) of your ZyAIR. |
|
|
IP Address | This is the IP address of the ZyAIR in dotted decimal notation. |
|
|
IP Mask | This shows the subnet mask of the ZyAIR. |
|
|
DHCP | This field shows the DHCP setting of the ZyAIR. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
12.2.2 Console Port Speed
You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
FigureAfter you changed the console port speed on your ZyAIR, you must also make the same change to the console port speed parameter of your communication software.
System Information |