ZyAIR
Follow the instructions in the following table to configure the fields in this menu.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
IP Address | Press [SPACE BAR] and then [ENTER] to select Dynamic to have the | Static |
Assignment | ZyAIR obtain an IP address from a DHCP server. You must know the |
|
| IP address assigned to the ZyAIR (by the DHCP server) to access the |
|
| ZyAIR again. |
|
| Select Static to give the ZyAIR a fixed, unique IP address. Enter a |
|
| subnet mask appropriate to your network and the gateway IP address if |
|
| applicable. |
|
IP Address | Enter the (LAN) IP address of your ZyAIR in dotted decimal notation | 192.168.1.11 |
|
|
|
IP Subnet Mask | Your ZyAIR will automatically calculate the subnet mask based on the | 255.255.255.0 |
| IP address that you assign. Unless you are implementing subnetting, |
|
| use the subnet mask computed by the ZyAIR. |
|
|
|
|
Gateway IP | Type the IP address of the gateway. The gateway is an immediate |
|
Address | neighbor of your ZyAIR that will forward the packet to the destination. |
|
| On the LAN, the gateway must be a router on the same network |
|
| segment as your ZyAIR. |
|
|
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
10.3 Wireless LAN Setup
Use menu 3.5 to configure your ZyAIR’s wireless settings. To edit menu 3.5, enter 3 from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.
LAN Setup |