Chapter 15 Static Route
15.3 IP Static Route Screen
Use this screen to view existing static route rules. Click Management > Static Route to open the IP Static Route screen. The following screen displays.
Figure 80 Management > Static Route > IP Static Route
The following table describes the labels in this screen.
Table 53 Management > Static Route > IP Static Route
LABEL | DESCRIPTION |
# | This is the index number of an individual static route. The first entry is for the |
| default route and not editable. |
|
|
Name | This is the name that describes or identifies this route. |
|
|
Active | This icon is turned on when this static route is active. |
| Click the Edit icon under Modify and select the Active checkbox in the Static |
| Route Setup screen to enable the static route. Clear the checkbox to disable |
| this static route without having to delete the entry. |
|
|
Destination | This parameter specifies the IP network address of the final destination. Routing |
| is always based on network number. |
|
|
Gateway | This is the IP address of the gateway. The gateway is an immediate neighbor of |
| your |
| gateway must be a router on the same segment as your |
| WAN, the gateway must be the IP address of one of the remote nodes. |
|
|
Modify | Click the Edit icon to open the static route setup screen. Modify a static route or |
| create a new static route in the Static Route Setup screen. |
| Click the Remove icon to delete a static route. |
|
|
134 |
|
|
|