Chapter 5 AP Mode

 

 

 

 

 

 

Table 20 Menu: AP Mode

 

 

 

LINK

TAB

FUNCTION

 

 

Maintenance

 

 

 

 

 

 

 

 

 

System

General

Use this screen to view and change administrative settings such

 

 

 

 

as system and domain names, password and inactivity timer.

 

 

 

 

 

 

 

 

Time Setting

Use this screen to change your NBG-417N’s time and date.

 

 

 

 

 

 

 

Logs

View Log

Use this screen to view the logs for the categories that you

 

 

 

 

selected.

 

 

 

 

 

 

 

Tools

Firmware

Use this screen to upload firmware to your NBG-417N.

 

 

 

 

 

 

 

 

Configuration

Use this screen to backup and restore the configuration or reset

 

 

 

 

the factory defaults to your NBG-417N.

 

 

 

 

 

 

 

 

Restart

This screen allows you to reboot the NBG-417N without turning

 

 

 

 

the power off.

 

 

 

 

 

 

 

Sys OP Mode

General

This screen allows you to select whether your device acts as a

 

 

 

 

Router or a Access Point.

 

 

 

 

 

 

 

Language

 

This screen allows you to select the language you prefer.

 

 

 

 

 

 

5.4 Configuring Your Settings

Use this section to configure your NBG-417N settings while in AP Mode.

5.4.1 LAN Settings

Click Network > LAN to see the screen below.

Note: If you change the IP address of the NBG-417N in the screen below, you will need to log into the NBG-417N again using the new IP address.

Figure 27 Network > LAN > IP

The table below describes the labels in the screen.

Table 21 Network > LAN > IP

LABEL

DESCRIPTION

Get from DHCP

Select this to let the DHCP server in the gateway assign the NBG-417N IP address.

Server

 

 

 

User Defined

Select this to give the NBG-417N a static IP address.

LAN IP

 

 

 

IP Address

Type the IP address in dotted decimal notatiion. The default setting is 192.168.1.2.

 

If you change the IP address you will have to log in again with the new IP address.

 

 

 

53

NBG-417N User’s Guide