ZyXEL Communications NBG-417N Product Specifications

The following tables summarize the NBG-417N’s hardware and firmware features.

Table 67 Hardware Features

Dimensions (W x D x H)	140 mm x 110 mm x 30 mm

Weight	190 g

Power Specification	Input: 120~240 AC, 50~60 Hz
	Output: 12 V DC 1A

Ethernet ports	Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
	mode.
	Auto-crossover: Use either crossover or straight-through Ethernet cables.

4-5 Port Switch	You can use either straight-through or crossover Ethernet cables (MDI/
	MDI-X support) to connect multiple computers or servers (for example,
	game servers) in your network to the NBG-417N.
	You can add up to four computers to the NBG-417N without the cost of a
	hub when connecting to the Internet through the WAN port. You can add
	up to five computers to the NBG-417N when you connect to the Internet in
	AP mode. Add more than four computers to your LAN by using a hub.

LEDs	PWR, LAN1-4, WAN, WLAN/WPS

Reset Button	The reset button is built into the rear panel. Use this button to restore the
	NBG-417N to its factory default settings. Press for 1 second to restart the
	device. Press for 5 seconds to restore to factory default settings.

WPS button	Press the WPS on two WPS enabled devices within 120 seconds for a
	security-enabled wireless connection.

Antenna	The NBG-417N is equipped with a 2dBi (2.4GHz) detachable antenna to
	provide clear radio transmission and reception on the wireless network.

Operation Environment	Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
	Humidity: 20% ~ 90%

Storage Environment	Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
	Humidity: 20% ~ 95%

Table 68 Firmware Features