Chapter 7 Wireless LAN

The following table describes the labels in this menu.

Table 28 Network > Wireless LAN > MAC Filter

LABEL

DESCRIPTION

Active

Select Yes from the drop down list box to enable MAC address filtering.

 

 

Filter Action

Define the filter action for the list of MAC addresses in the MAC Address table.

 

Select Deny to block access to the NBG-417N, MAC addresses not listed will be

 

allowed to access the NBG-417N

 

Select Allow to permit access to the NBG-417N, MAC addresses not listed will be

 

denied access to the NBG-417N.

 

 

Set

This is the index number of the MAC address.

 

 

MAC Address

Enter the MAC addresses of the wireless station that are allowed or denied access to

 

the NBG-417N in these address fields. Enter the MAC addresses in a valid MAC

 

address format, that is, six hexadecimal character pairs, for example,

 

12:34:56:78:9a:bc.

 

 

Apply

Click Apply to save your changes back to the NBG-417N.

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

7.6 Wireless LAN Advanced Screen

Use this screen to allow intra-BSS networking and set the RTS/CTS Threshold. Click Network > Wireless LAN > Advanced. The screen appears as shown. Figure 47 Network > Wireless LAN > Advanced

The following table describes the labels in this screen.

Table 29 Network > Wireless LAN > Advanced

LABEL DESCRIPTION

Wireless Advanced Setup

RTS/CTS

Data with its frame size larger than this value will perform the RTS (Request To

Threshold

Send)/CTS (Clear To Send) handshake.

 

Enter a value between 0 and 2432.

 

 

78

 

NBG-417N User’s Guide