Chapter 22 Sys OP Mode

AP

An AP extends one network and so has just one IP address. All Ethernet ports on the AP have the same IP address. To connect to the Internet, another device, such as a router, is required.

Figure 110 IP Address in AP Mode

22.4 General Screen

Use this screen to select how you connect to the Internet.

Figure 111 Maintenance > Sys OP Mode > General

If you select Router Mode, the following pop-up message window appears.

Figure 112 Maintenance > Sys Op Mode > General: Router

In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet ports have different IP addresses.

The DHCP server on your device is enabled and allocates IP addresses to other devices on your local network.

The LAN IP address of the device on the local network is set to 192.168.1.1.

You can configure the IP address settings on your WAN port. Contact your ISP or system administrator for more information on appropriate settings.

 

165

NBG-417N User’s Guide