ZyXEL Communications NBG-417N Static Route, 15.1 Overview, 15.2What You Can Do

15

Static Route

15.1 Overview

This chapter shows you how to configure static routes for your NBG-417N.

This chapter shows you how to configure static routes for your NBG-417N.

Each remote node specifies only the network to which the gateway is directly connected, and the NBG-417N has no knowledge of the networks beyond. For instance, the NBG-417N knows about network N2 in the following figure through remote node Router 1. However, the NBG-417N is unable to route a packet to network N3 because it doesn't know that there is a route through the same remote node Router 1 (via gateway Router 2). The static routes are for you to tell the NBG- 417N about the networks beyond the remote nodes.

Figure 79 Example of Static Routing Topology

15.2What You Can Do

•Use the IP Static Route screen (Section 15.3 on page 134) to view existing static route rules.

•Use the Static Route Setup screen (Section 15.3.1 on page 135) to add or edit a static route rule.

	133
NBG-417N User’s Guide