Chapter 3 Introducing the Web Configurator

3.3 Resetting the NBG-417N

If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the NBG-417N to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to “1234” and the IP address will be reset to “192.168.1.1”.

3.3.1 Procedure to Use the Reset Button

1Make sure the power LED is on.

2Press the RESET button for longer than 1 second to restart/reboot the NBG-417N.

3Press the RESET button for longer than five seconds to set the NBG-417N back to its factory- default configurations.

3.4Navigating the Web Configurator

The following summarizes how to navigate the Web Configurator from the Status screen in Router Mode and AP Mode.

3.5 Status Screen (Router Mode)

Click on Status. The screen below shows the status screen in Router Mode.

 

27

NBG-417N User’s Guide