Sharp R-82STM Other Convenient Functions, Multiple Sequence Cooking, Example, Timer, key 5 times

OTHER CONVENIENT FUNCTIONS

1.MULTIPLE SEQUENCE COOKING:

A sequence of 4 stages (maximum) can be programmed using combinations of MICROWAVE, CONVECTION, GRILL or DUAL COOKING.

•To programme a series of sequences: Input the cooking time followed by the desired cooking mode.

•Repeat this procedure three times, to a maximum of four sequences.

•Finally, press the START/AUTO MINUTE key to start sequence cooking.

Example:

If you want to cook for 5 minutes on 100% microwave power and then for 16 minutes on 30% power.

Input the time

Input the

Input the time Input the

(5 min.)

power 100% (HIGH)

(16 min.)	power 30%
	(MED LOW)

Start

1st Stage

2.TIMER:

2nd Stage

You can use the TIMER for timing where microwave cooking is not involved. For example, to time boiled eggs cooked on a conventional hob, to monitor the standing time for microwaved food or to remind you of the time when making a phone call.

Example: To set the timer for 5 minutes to boil an egg on a conventional hob.

x1

1.Press the

TIMER key once.

x5	x1
2. Press the 1 MINUTE	3. When the water comes to	4. The display will count down.
key 5 times.	the boil, add the egg, and	When the display reaches
	press the START/AUTO	zero, the ‘beep’ signal will
	MINUTE key once.	sound.

You can enter any time up to 99 minutes, 90 seconds. To cancel the TIMER whilst counting down, simply press STOP/CLEAR and the display will return to the time of day, if set.

3.TO CHECK THE POWER LEVEL

To check the microwave power level during cooking press the MICROWAVE POWER LEVEL key. As long as your finger is touching the MICROWAVE POWER LEVEL key the power level will be displayed.The oven continues to count down although the display will show the power level.

21