INSTALLATION(Continued)

5.Make sure the power supply cord is undamaged (See Installation next page) and that it does not run under the oven or over any hot or sharp surfaces.

6.The socket must be readily accessible so that it can be easily unplugged in an emergency.

7.Do not use the oven outdoors.

BUILDING-IN-KIT

An installation frame is available which enables the microwave oven to be integrated within a kitchen unit.

The microwave oven is not designed to be built above or near a conventional oven.

SHARP recommend the use of the build in kit, EBR-47ST, available from your SHARP dealer. Only the use of this frame will guarantee the quality and safety of the oven. When building, follow installation instructions supplied carefully.

IMPORTANT ELECTRICAL CONNECTION

•Do not allow water to come into contact with the power supply cord or plug.

•Insert the plug properly into the socket as the plug may otherwise overheat and catch fire.

•Do not connect other appliances to the same socket using an adaptor plug as it may cause the house wiring to overheat and catch fire.

•If the plug or socket is loose or the power supply cord is damaged, it must be replaced with a special cord. The exchange must be made by an authorised SHARP service agent. A defective plug, power supply cord or socket may overheat and catch fire during operation or cause an electrical shock.

•When removing the plug from the socket always grip the plug, never the mains lead as this may damage the power supply cord and the connections inside the plug.

•The product is fitted with a re-wireable plug. Should it not be suitable for the socket outlet in your home, remove the plug and fit an appropriate type, observing the wiring code on page 63.

If you wish to remove or replace the plug supplied, ensure the plug is removed properly and not cut off. When replacing the plug please ensure that you use a BSI or ASTA approved plug to BS1363, this should be fitted with a brown coloured 13 amp fuse approved by BSI or ASTA to BS1362. If you have any doubt about electrical connection seek the help of a qualified electrician.

WARNING - IMPORTANT NOTE

Please note both the Operation Manual and Cookery Book supplied specify 900W (IEC 705) microwave output power. This applies only when the oven is operated on a 230-240V supply.

If your supply is less than 230-240V, it may be necessary to increase the cooking time when following the Operation Manual and Cookery Book instructions.

WARNING:

THIS APPLIANCE MUST BE EARTHED

To wire an appropriate plug, follow the wiring code on page 63.

BEFORE OPERATION

Plug in the oven.

1. The oven display will flash the message shown opposite.

2. Press the STOP/CLEAR key.

3. Set the clock, refer to the next page.

4. Heat the oven using the top and lower grills without food for 20 minutes. (For operation, see NOTES on page 11).

 

 

 

Use the STOP/CLEAR key to:

STOP/CLEAR key

1. Erase a mistake during programming.

2. Stop the oven temporarily during cooking.

 

 

 

 

 

 

3. Cancel a programme during cooking, press twice.

5

Page 6 Page 8
Page 7
Image 7
Sharp R-82STM Building-In-Kit, Important Electrical Connection, This Appliance Must be Earthed, Press the STOP/CLEAR key
Page 6 Page 8

R-82STM specifications

The Sharp R-82STM is a versatile and efficient commercial microwave oven that has gained recognition in the food service industry for its reliable performance and user-friendly features. Ideal for restaurants, cafes, and catering services, this model is designed to meet the rigorous demands of high-volume food preparation while ensuring consistent cooking results.

One of the standout features of the Sharp R-82STM is its spacious 20-liter capacity, which allows for the heating and cooking of larger quantities of food simultaneously. This makes it an excellent choice for establishments that require quick turnaround times during busy service hours. The oven is equipped with a rotating turntable that ensures even distribution of microwave energy, promoting uniform cooking and reheating.

The R-82STM utilizes advanced microwave technology, specifically a 900W power output with variable power levels. This flexibility enables users to choose the optimal power setting for different types of food, making it suitable for a wide range of culinary applications—from defrosting and reheating to cooking a variety of menu items. With eight programmable memory settings, operators can easily recall their most frequently used cooking times and power levels, streamlining workflow in fast-paced environments.

Additionally, the oven is designed with user convenience in mind. The easy-to-read digital display and intuitive control panel allow for simple navigation, while the stainless steel interior provides durability and ease of cleaning. The door design includes safety features, such as a child lock and an automatic shut-off function, ensuring both user safety and energy efficiency.

The Sharp R-82STM also features a manual and automatic cooking modes, providing flexibility for both novice and experienced users. The manual mode allows for precise control over cooking times, while the automatic mode utilizes built-in sensors to adjust cooking parameters according to the type of food being prepared.

Overall, the Sharp R-82STM is a well-engineered commercial microwave oven that combines practical features with cutting-edge technology. Its robust construction, ease of use, and versatile capabilities make it a valuable asset in any food service operation, catering to the needs of chefs and kitchen staff while enhancing productivity and efficiency.
Top Page Image Contents