Chapter 21 Tools
User’s Guide 193
21.3.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NBG4115.

Note: Do not turn off the NBG4115 while configuration file upload is in progress

After you see a “configuration upload successful” screen, you must then wait one
minute before logging into the NBG4115 again.

Figure 106 Configuration Restore Successful

The NBG4115 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.

Figure 107 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
NBG4115 IP address (192.168.1.1). See Appendix D on page 233 for details on
how to set up your computer’s IP address.

Table 66 Maintenance Restore Configuration

LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse... to find it.
Choose File Click Choose File to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process.