Chapter 6 Tutorials
User’s Guide 77
Enter the following values for each service you want to add. For this tutorial, you
need to add each of the following service (see table below) and click Apply.
After adding these services, go to Management > Bandwidth MGMT >
Advanced and check if you have the correct values.
Figure 40 Tutorial: Bandwidth Allocation Example
Note: The Policy column displays either Max (maximum) or Min (minimum). This is
directly directed to the value in the Rate column. For example, you selected
Min and entered 30M as the rate for the VoIP service. The NBG4115 allocates
at least 30 megabytes for the VoIP service.
Refer to Appedix F on page 263 for a list of common services that you can add in
the Bandwidth Mgnt screen.
Table 24
FIELDS SERVICES
REAL AUDIO RTSP VDO LIVE FTP
Active Check this to turn on this bandwidth management rule.
Direction Select Both applies bandwidth management to traffic
that the NBG4115 forwards to both the LAN and the
WAN.
Select To WAN
LAN IP
Range Enter 192.168.1.1 ~ 192.168.1.33.Enter
192.168.1.34
Protocol TCP TCP or UDP TCP TCP
Port Range 7070 554 7000 20 ~ 21
Policy Min Max
Rate Select 30M as the minimum bandwidth allowed. Select 64K
Apply Click this to add the rule to the Bandwidth Allocation table.