Chapter 4 Connection Wizard
User’s Guide
44
Note: When you select Mobile 3G, then all WAN connections are made through this.
Check with your ISP to make sure you use the correct ty p e.
This wizard screen varies according to the connection type that you select.
Figure 15 Wizard Step 3: ISP Parameters.
The following table describes the labels in this screen,
4.5.1 Ethernet Connection
Choose Ethernet when the WAN port is used as a regular Ethernet. Continue to
Section 4.5.5 on page 49.
Figure 16 Wizard Step 3: Ethernet Connection
Table 11 Wizard Step 3: ISP Parameters
CONNECTION
TYPE DESCRIPTION
Ethernet Select the Ethernet option when the WAN port is used as a regular
Ethernet.
PPPoE Select the PPP over Ethernet option for a dial-up connection. If
your ISP gave you an IP address and/or subnet mask, then select
PPTP.
PPTP Select the PPTP option for a dial-up connection.
Mobile 3G Select the Mobile 3G option for a USB 3G connection.