Chapter 1 Introducing the STB
Figure 3 Rear Panel Connections
Table 2 Rear Panel Connections
LABEL | DESCRIPTION |
ON/OFF | Use this switch to turn the STB on or off. |
|
|
POWER | Connect this port to a suitable power supply using the provided adaptor. |
|
|
USB | Use this port to connect to a USB keyboard (not supplied). |
|
|
LAN | Use this Ethernet port to connect the STB to your Internet access device or |
| network. |
|
|
S/PDIF | Use this port to connect the STB to an S/PDIF (Sony / Philips Digital Interface |
| Format) audio device. |
|
|
CVBS | Use this composite video RCA connector to connect the STB to your TV’s |
| analog video input (usually colored yellow). |
| The composite video connector does not carry audio. You must also connect |
| your TV to one of the STB’s audio connectors. |
|
|
L, R | Use these to connect the STB to your audio device’s analog audio inputs. |
| L: The white RCA connector carries the stereo audio signal (left channel). |
| R: The red RCA connector carries the stereo audio signal (right channel). |
|
|
1.4 Resetting the STB
To reset the STB to its factory defaults, use the System Setup menu (see Section 2.2.4 on page 24).
| 19 |
|
|