Chapter 2 The Menu System
The following table describes the labels in this screen.
Table 4 The Audio Setup Menu
LABEL | DESCRIPTION |
PCM | Select this to use PCM (Pulse Code Modulation) audio |
| compression. Select this only if your TV or audio equipment |
| (connected to the STB’s S/PDIF connector) also supports PCM. |
|
|
AC3/AAC | Select this to use |
| Coding) audio compression. Select this only if your TV or audio |
| equipment (connected to the STB’s S/PDIF connector) also |
| supports |
|
|
Save | Select this to store your changes. You may need to reboot your |
| STB (use the ON/OFF hardware switch) before the new settings |
| are used. |
|
|
Use the System Setup menu to check the STB’s date and time settings, change the time zone, and activate or deactivate Daylight Saving Time.
Figure 7 The System Setup Menu
The following table describes the labels in this menu.
Table 5 The System Setup Menu
LABEL | DESCRIPTION |
Date | This is the current date. This comes from an external time server. |
|
|
Time | This is the current time. This comes from an external time server. |
|
|
Time Zone | Select your time zone from the list. In the list, 0 is GMT (Greenwich |
| Mean Time) so, for example, 8 is GMT plus eight hours. |
|
|
Daylight Saving Time | Select this when Daylight Saving Time is in effect. |
|
|
Save | Select this to store your configuration changes. |
|
|
Use this menu to select the STB’s operating language. At the time of writing, only English is supported.
24 |
| |
| ||
|
|
|