Chapter 2 The Menu System

2.3.3.3 Network: PPPoE

Select PPPoE in the Network menu. The following menu displays.

Figure 14 The Network: PPPoE Menu

The following table describes the labels in this menu that were not already described in table 7.

Table 9 The Network: PPPoE Menu

LABEL

DESCRIPTION

Mode

Select PPPoE to use a Point-to-Point Protocol over Ethernet

 

service.

 

 

User Name

Enter the username for your PPPoE account.

 

 

Password

Enter the password for your PPPoE account.

 

 

2.3.4 The Advanced Setup: Firmware Upgrade Menu

Use this menu to get new firmware from the autoconfiguration server. You must be connected to the network and have a valid autoconfiguration server address configured in the Advanced Setup: Network menu’s ACS Server field (see Section 2.3.3 on page 27).

Select Firmware Upgrade from the column on the left of the screen. The following menu displays.

Figure 15 The Firmware Upgrade Menu

 

29

STB-1001S2 User’s Guide