Chapter 2 The Menu System
Table 7 The Network: DHCP Menu
LABEL | DESCRIPTION |
Home URL | Enter the address of the homepage the STB uses as the Home |
| menu (the screen that displays when you press the HOME key on |
| the remote control). |
|
|
ACS Server | This field is for remote management. Change the information in |
| this field only if you were specifically told to do so. |
| Enter the address of the |
| STB gets its operating settings. |
|
|
NTP Server | Enter the address of the Network Time Protocol server from which |
| the STB gets its date and time settings. |
|
|
Save | Select this to store your configuration changes. |
|
|
2.3.3.2 Network: Static IP Address
Select Static in the Network menu. The following menu displays.
Figure 13 The Network: Static IP Menu
The following table describes the labels in this menu that were not already described in table 7.
Table 8 The Network: Static IP Menu
LABEL | DESCRIPTION |
Mode | Select Static to give the STB a specific IP address. |
|
|
STB IP | Enter the IP address you want to assign to the STB. |
|
|
Subnet Mask | Enter the subnet mask of the STB’s IP address. |
|
|
Gateway | Enter the IP address of the network gateway. |
|
|
Primary DNS | Enter the IP address of the primary Domain Name Server. DNS |
| allows your STB to resolve domain names (such as zyxel.com) into |
| IP addresses. |
|
|
Secondary DNS | Enter the IP address of the secondary (backup) Domain Name |
| Server. |
|
|
28 |
| |
| ||
|
|
|