Chapter 4 Product Specifications
3Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.
4Make sure the screws are snugly fastened to the wall. They need to hold the weight of the STB with the connection cables.
5Align the holes on the back of the STB with the screws on the wall. Hang the STB on the screws.
Figure 17
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimeters (mm).
Figure 18 Masonry Plug and M4 Tap Screw
38 |
| |
| ||
|
|
|