Chapter 7 Tutorials

1Click Configuration > Object > Address. Click the Add icon.

2Give the new address object a name (“VPN_REMOTE_SUBNET”), change the Address Type to SUBNET. Set up the Network field to 172.16.1.0 and the Netmask to 255.255.255.0. Click OK.

Figure 97 Configuration > Object > Address > Add

3Click Configuration > VPN > IPSec VPN > VPN Connection. Click the Add icon.

4Enable the VPN connection and name it (“VPN_CONN_EXAMPLE”). Under VPN Gateway select Site-to-siteand the VPN gateway (VPN_GW_EXAMPLE). Under Policy, select LAN_SUBNET for the local network and VPN_REMOTE_SUBNET for the remote. Click OK.

Figure 98 Configuration > VPN > IPSec VPN > VPN Connection > Add

5Now set up the VPN settings on the peer IPSec router and try to establish the VPN tunnel. To trigger the VPN, either try to connect to a device on the peer IPSec router’s LAN or click Configuration > VPN > IPSec VPN > VPN Connection and use the VPN connection screen’s Connect icon.

 

141

ZyWALL USG 300 User’s Guide