ZyXEL Communications USG 300 6.2.2 Default Interface and Zone Configuration

Chapter 6 Configuration Basics

6.2.2 Default Interface and Zone Configuration

This section introduces the ZyWALL’s default zone member physical interfaces and the default configuration of those interfaces. The following figure uses letters to denote public IP addresses or part of a private IP address.

Figure 55 Default Network Topology

Table 13 Default Port, Interface, and Zone Configuration

PORT	INTERFACE	ZONE	IP ADDRESS AND DHCP	SUGGESTED USE WITH
			SETTINGS	DEFAULT SETTINGS
1	ge1	LAN	192.168.1.1, DHCP server	Protected LAN
			enabled
2, 3	ge2, ge3	WAN	DHCP clients	Connections to the Internet
4, 5	ge4, ge5	DMZ	192.168.2.1 (ge4) and	Public servers (such as web,
			192.168.3.1 (ge5), DHCP	e-mail and FTP)
			server disabled
6	ge6	WLAN	10.59.0.1, DHCP server	Wireless access points
			enabled
7	ge7	None	None, DHCP server	Optional
			disabled
AUX	aux	None	None	Auxiliary modem
CONSOLE	N/A	None	None	Local management

•The LAN zone contains the ge1 interface. The LAN zone is a protected zone. The ge1 interface uses 192.168.1.1.

94
	ZyWALL USG 300 User’s Guide