Chapter 56 Troubleshooting

If you want to reboot the device without changing the current configuration, see Chapter 54 on page 891.

1Make sure the SYS LED is on and not blinking.

2Press the RESET button and hold it until the SYS LED begins to blink. (This usually takes about five seconds.)

3Release the RESET button, and wait for the ZyWALL to restart.

You should be able to access the ZyWALL using the default settings.

56.2Getting More Troubleshooting Help

Search for support information for your model at www.zyxel.com for more troubleshooting suggestions.

 

913

ZyWALL USG 300 User’s Guide