Chapter 1 Introducing the ZyWALL

Use a #2 Phillips screwdriver to install the screws.

Note: Failure to use the proper screws may damage the unit.

1.2.1Rack-Mounted Installation Procedure

1Align one bracket with the holes on one side of the ZyWALL and secure it with the included bracket screws (smaller than the rack-mounting screws).

2Attach the other bracket in a similar fashion.

Figure 1 Attaching Mounting Brackets and Screws

3After attaching both mounting brackets, position the ZyWALL in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the ZyWALL to the rack with the rack-mounting screws.

Figure 2 Rack Mounting

34

 

ZyWALL USG 300 User’s Guide