ZyXEL Communications USG 300 7.7.2 Set Up User Groups, 7.7.3Set Up User Authentication Using the RADIUS Server

Chapter 7 Tutorials

7.7.2 Set Up User Groups

Set up the user groups and assign the users to the user groups.

1Click Configuration > Object > User/Group > Group. Click the Add icon.

2Enter the name of the group that is used in Table 20 on page 144. In this example, it is “Finance”. Then, select User/Leo and click the right arrow to move him to the Member list. This example only has one member in this group, so click OK. Of course you could add more members later.

Figure 101 Configuration > Object > User/Group > Group > Add

3Repeat this process to set up the remaining user groups.

7.7.3Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to use the authentication method. Finally, force users to log in to the ZyWALL before it routes traffic for them.

146
	ZyWALL USG 300 User’s Guide