ZyXEL Communications USG 300 manual 244

Chapter 10 Monitor

There is a limit on the number of records shown in the report. Please see Table 32 on page 245 for more information. The following table describes the labels in this screen.

Table 31 Monitor > System Status > Traffic Statistics

LABEL	DESCRIPTION
Data Collection
Collect	Select this to have the ZyWALL collect data for the report. If the ZyWALL
Statistics	has already been collecting data, the collection period displays to the
	right. The progress is not tracked here real-time, but you can click the
	Refresh button to update it.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.
Statistics
Interface	Select the interface from which to collect information. You can collect
	information from Ethernet, VLAN, bridge, PPPoE/PPTP, and auxiliary
	interfaces.
Traffic Type	Select the type of report to display. Choices are:
	Host IP Address/User - displays the IP addresses or users with the
	most traffic and how much traffic has been sent to and from each one.
	Service/Port - displays the most-used protocols or service ports and
	the amount of traffic for each one.
	Web Site Hits - displays the most-visited Web sites and how many
	times each one has been visited.
	Each type of report has different information in the report (below).
Refresh	Click this button to update the report display.
Flush Data	Click this button to discard all of the screen’s statistics and update the
	report display.
	These fields are available when the Traffic Type is Host IP Address/
	User.
#	This field is the rank of each record. The IP addresses and users are
	sorted by the amount of traffic.
IP Address/	This field displays the IP address or user in this record. The maximum
User	number of IP addresses or users in this report is indicated in Table 32 on
	page 245.
Direction	This field indicates whether the IP address or user is sending or receiving
	traffic.
	Ingress- traffic is coming from the IP address or user to the ZyWALL.
	Egress - traffic is going from the ZyWALL to the IP address or user.
Amount	This field displays how much traffic was sent or received from the
	indicated IP address or user. If the Direction is Ingress, a red bar is
	displayed; if the Direction is Egress, a blue bar is displayed. The unit of
	measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount
	of traffic for the particular IP address or user. The count starts over at
	zero if the number of bytes passes the byte count limit. See Table 32 on
	page 245.

244
	ZyWALL USG 300 User’s Guide