ZyXEL Communications USG 300 22.3 IP/MAC Binding Exempt List

Chapter 22 IP/MAC Binding

The following table describes the labels in this screen.

Table 112 Configuration > Network > IP/MAC Binding > Edit > Add

LABEL	DESCRIPTION
Interface	This field displays the name of the interface within the ZyWALL and the
Name	interface’s IP address and subnet mask.
IP Address	Enter the IP address that the ZyWALL is to assign to a device with the
	entry’s MAC address.
MAC Address	Enter the MAC address of the device to which the ZyWALL assigns the
	entry’s IP address.
Description	Enter up to 64 printable ASCII characters to help identify the entry. For
	example, you may want to list the computer’s owner.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving.

22.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the ZyWALL does not apply IP/MAC binding.

Figure 332 Configuration > Network > IP/MAC Binding > Exempt List

The following table describes the labels in this screen.

Table 113 Configuration > Network > IP/MAC Binding > Exempt List

LABEL	DESCRIPTION
Add	Click this to create a new entry.
Edit	Click an entry or select it and click Edit to modify the entry’s settings.
Remove	To remove an entry, select it and click Remove. The ZyWALL confirms
	you want to remove it before doing so.
#	This is the index number of the IP/MAC binding list entry.
Name	Enter a name to help identify this entry.
Start IP	Enter the first IP address in a range of IP addresses for which the
	ZyWALL does not apply IP/MAC binding.

	439
ZyWALL USG 300 User’s Guide