ZyXEL Communications USG 300 manual 226

Chapter 9 Dashboard

Table 21 Dashboard (continued)

LABEL	DESCRIPTION
Action	Use this field to get or to update the IP address for the interface.
	Click Renew to send a new DHCP request to a DHCP server.
	Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP
	interface or the auxiliary interface. If the interface cannot use one of
	these ways to get or to update its IP address, this field displays n/a.
	Click the Disconnect icon to stop a PPPoE/PPTP or auxiliary interface’s
	connection.
Extension Slot	This section of the screen displays the status of the extension card slot
	and the USB ports.
Slot	This field displays the name of each extension slot.
Device	This field displays the name of the device connected to the extension slot
	(or none if no device is detected).
Status	The status for an installed WLAN card is none. For cellular (3G)
	interfaces, see Section 10.10 on page 252 for the status that can appear.
System Status
System	This field displays how long the ZyWALL has been running since it last
Uptime	restarted or was turned on.
Current	This field displays the current date and time in the ZyWALL. The format
Date/Time	is yyyy-mm-dd hh:mm:ss.
VPN Status	Click this to look at the VPN tunnels that are currently established. See
	Section 9.2.1 on page 228.
DHCP Table	Click this to look at the IP addresses currently assigned to the ZyWALL’s
	DHCP clients and the IP addresses reserved for specific MAC addresses.
	See Section 9.2.5 on page 231.
Current	This field displays the user name used to log in to the current session,
Login User	the amount of reauthentication time remaining, and the amount of lease
	time remaining. See Chapter 40 on page 715.
Number of	This field displays the number of users currently logged in to the
Login Users	ZyWALL. Click the icon to pop-open a list of the users who are currently
	logged in to the ZyWALL. See Section 9.2.6 on page 232.

226
	ZyWALL USG 300 User’s Guide