ZyXEL Communications USG 300 22.2 IP/MAC Binding Summary, 22.1.2 What You Need to Know

Chapter 22 IP/MAC Binding

22.1.2 What You Need to Know

DHCP

IP/MAC address bindings are based on the ZyWALL’s dynamic and static DHCP entries.

Interfaces Used With IP/MAC Binding

IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with Ethernet, bridge, VLAN, and WLAN interfaces. You can also enable or disable IP/MAC binding and logging in an interface’s configuration screen.

22.2 IP/MAC Binding Summary

Click Configuration > Network > IP/MAC Binding to open the IP/MAC Binding Summary screen. This screen lists the total number of IP to MAC address bindings for devices connected to each supported interface.

Figure 329 Configuration > Network > IP/MAC Binding > Summary

The following table describes the labels in this screen.

Table 110 Configuration > Network > IP/MAC Binding > Summary

LABEL	DESCRIPTION
Edit	Double-click an entry or select it and click Edit to open a screen where
	you can modify the entry’s settings.
Activate	To turn on an entry, select it and click Activate.
Inactivate	To turn off an entry, select it and click Inactivate.

436
	ZyWALL USG 300 User’s Guide