Chapter 2 Hardware Installation and Connection

Note: Do NOT block the ventilation holes. Leave space between devices when stacking.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and 3.4 inches (8 cm) at the back of the Switch. This is especially important for enclosed rack installations.

2.2 Mounting the Switch on a Rack

This section lists the rack mounting requirements and precautions and describes the installation steps.

2.2.1Rack-mounted Installation Requirements

Two mounting brackets.

Eight M3 flat head screws and a #2 Philips screwdriver.

Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.
2.2.1.1Precautions

Make sure the rack will safely support the combined weight of all the equipment it contains.

Make sure the position of the Switch does not make the rack unstable or top- heavy. Take all necessary precautions to anchor the rack securely before installing the unit.

2.2.2Attaching the Mounting Brackets to the Switch

1Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with the screw holes on the side of the Switch.

Figure 6 Attaching the Mounting Brackets

12

 

GS1910/XGS1910 Series User’s Guide