ZyXEL Communications GS1910, XGS1910 manual 64

Chapter 5 Tutorials

2Go to Configuration > Security > Network > ACL > Access Control List. Click the Add icon to create a new ACL policy.

3Select the port on which the matched traffic is received (All ports in this example).

4Set Policy Filter to Specific and Policy Bitmask to 0xff to give this policy one ID number in the Policy Value field. You then can apply this policy to a port using this policy ID.

5Select IPv4 in the Frame Type field.

6Select Network in the DIP Filter field and specify the destination address and subnet mask of matched traffic in this policy.

7Set Action to Deny to block all mattached traffic.

64
	GS1910/XGS1910 Series User’s Guide