Chapter 3 Hardware Overview

Figure 19 Rear Panel: GS1910-24HP

Figure 20 Front Panel: GS1910-48

Figure 21 Front Panel: GS1910-48HP

Figure 22 Front Panel: XGS1910-24

Figure 23 Front Panel: XGS1910-48

3.2.1 Power Connector

Make sure you are using the correct power source as shown on the panel and that no objects obstruct the airflow of the fans.

Use the following procedures to connect the Switch to a power source after you have installed it.

1Connect the female end of the power cord to the power socket of your Switch.

2Connect the other end of the cord to a power outlet.

Keep the power supply switch and the Switch’s power switch in the OFF position until you come to the procedure for turning on the power.

Note: Use only power wires of the required diameter for connecting the Switch to a power supply.

 

21

GS1910/XGS1910 Series User’s Guide