Chapter 5 Tutorials

9Click Save.

10Configure both the router port and the ports to which the multicast clients connect as a member of VLAN 1234. See Section 5.4 on page 38 for how to create a VLAN and configure ports to join the VLAN.

11Go to Configuration > IPMAC > IGMP Snooping > VLAN Configuration.

12Select Snooping Enabled for VLAN 1234 to allow the Switch to learn the IP multicast group membership of this VLAN.

13Select IGMP Querier for VLAN 1234 to allow the Switch to act as the querier in the VLAN to send IGMP General Query (GQ) and Group-Specific Query (GSQ) messages to this VLAN. A querier sends out an IGMP Group-Specific Query (GSQ) message to determine whether the hosts connected to the port should remain in the specific multicast group.

62

 

GS1910/XGS1910 Series User’s Guide