5

Tutorials

This chapter provides some examples of using the Web Configurator to set up and use the Switch. The tutorials include:

•How to Change Switch Management IP Address

•How to Configure Login Accounts and Privilege Levels

•How to Manage a Configuration File

•How to Create a VLAN

•How to Set Up a Guest VLAN with IEEE 802.1x Authentication

•How to Use Private VLAN to Do Port Isolation in a VLAN

•How to Use IP Source Guard and DHCP Snooping to Prevent Spoofed Traffic

•How to Use DHCP Relay on the Switch

•How to Use Link Aggregation to Group Multiple Ports into One Logical Link

•How to Analyze Traffic Using Mirroring

•How to Use IGMP Snooping to Reduce Multicast Traffic Passing through your Switch

•How to Configure Access Control List (ACL) for Packets Filtering

•How to Reset the Switch via the Console Port

5.1How to Change Switch Management IP Address

The default management IP address of the Switch is 192.168.1.1. You can configure the IP address to be in the same subnet as your network or have the Switch obtain a dynamic IP address from a DHCP server in your network. The following figure shows an example.

Figure 27 Initial Setup Example: Management IP Address

 

33

GS1910/XGS1910 Series User’s Guide