ZyXEL Communications GS1910, XGS1910 In Switch B:

Chapter 5 Tutorials

9Go to Configuration > MAC Table to disable MAC address learning on the reflector and intermediate ports so that the Switch will NOT filter or forward a frame based on the frame’s destination MAC address, or even drop the frame whose MAC address is not in the MAC address table on these ports.

In Switch B:

1Access the Switch through http://192.168.1.1. Log into the Switch by entering the username (default: admin) and password (default: 1234).

2Go to Configuration > Port Mirroring. Select Enabled in the Mode field to activate mirroring on the Switch.

3Set Type to Intermediate to configure the intermediate ports that help forward traffic.

4Enter the remote port mirroring VLAN ID number (100 in this example). The Switch will automatically create the remote port mirroring VLAN and configure the intermediate ports as a member of this VLAN.

5Configure ports (3 and 4 for example) to act as the intermediate ports that connect to Switch A and Switch C.

	57
GS1910/XGS1910 Series User’s Guide