Chapter 3 Hardware Overview

2Pull the transceiver out of the slot.

Figure 17 Transceiver Removal Example

3.1.4Console Port

For local management, you can use a computer with terminal emulation software configured to the following parameters:

VT100 terminal emulation

115200 bps

No parity, 8 data bits, 1 stop bit

No flow control

Connect the male 9-pin end of the RS-232 console cable to the console port of the Switch. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer.

3.2 Rear Panel

The following figure shows the rear panel of the Switch. The rear panel contains a connector for the power receptacle. The GS1910-48 and GS1910-48HP also have a console port on the rear panel. The XGS1910-48 has one console port and two SFP+ slots on the rear panel.

Figure 18 Rear Panel: GS1910-24

20

 

GS1910/XGS1910 Series User’s Guide