Kodak 3H0610, Kodak 10/100 Network Interface Card manual I N T O S H

Apple/Macintosh Environments

9.2Configuring Macintosh Systems for Printing

You should verify that this platform is supported for printing to your printer or proofer. Refer to the user guides and Readme files that came with your unit for information about installing software to support PostScript and raster mode printing, calibration, and so on. If necessary, refer to Appendix E, Technical Assistance.

•Install the Kodak-developed PostScript driver for Macintosh for printing when the printer is in PostScript mode.

•Install the Kodak - Adobe PhotoShop Export Module for Macintosh for printing (exporting) when the printer is in raster mode.

Note: Check your printer Readme files for notes about your printer.

9.3Contents of NIC Utilities for Macintosh Diskette

Note: These Macintosh utilities work only with a Kodak printer in PostScript mode (LaserWriter). For Kodak printers that are raster ONLY, use Telnet or utilities for Windows or Unix platforms.

The Macintosh Utilities diskette contains the following files. Copy the contents to your hard drive.

•! IMPORTANT!—provides important details that an administrator MUST be aware of. It also includes steps for verifying that your printer and NIC are functional on your network.

•Read Me—provides an overview of configuration procedures.

•Namer—can be used to modify the AppleTalk name that the printer (NIC) will use to advertise itself over the network. This is the printer name you will see in the Chooser.

You may wish to rename the printer from its unique Network Interface Card identifier (“KDxxxxxx” where “xxxxxx” is the last 6 digits of the Ethernet hardware address) to a name more descriptive of the printer.

Note: To modify the AppleTalk name, you must use the Namer utility.

•Apple Printer Utility—can be used to download NIC and printer configuration files after they have been edited to reflect your network preferences.

M

A C I N T O S H

July 1998 9-3