Kodak Kodak 10/100 Network Interface Card FastManage Hardware Requirements, Software Requirements

F

A S T M A N A G E

Windows - FastManage Configuration Utilities

3.1.1FastManage Hardware Requirements

FastManage requires:

¥A 486 Pentium PC, 66 Mhz computer or higher

¥16 MB of RAM or higher

¥At least 4 MB of free disk space

¥Microsoft Windows 3.1 or higher

¥Ethernet card installed

FastManage runs as a stand-alone tool (that is, users need not have any TCP/IP packages on their systems). However, if a system has any Winsock compatible TCP/IP stacks (that is, PC/TCP, Chameleon, or LAN Workplace), FastManage will co-exist with these packages. FastManage runs on top of public domain packet drivers as well as ODI drivers.

3.1.2Software Requirements

IP ConÞguration

¥Packet or ODI Driver must be loaded for the PC network interface.

¥For ODI Drivers, add the following line to the net.cfg Þle: Frame Ethernet_II

IPX ConÞgurations

¥Novell 4.1 Drivers for Windows and DOS. Refer to the Novell Netware Documentation for information.

¥ODI Driver must be loaded for the PCÕs network interface.

NetBIOS ConÞguration

¥NetBIOS over NetBEUI network conÞguration for Windows 3.11 or Windows 95.

3-2 July 1998