Kodak Kodak 10/100 Network Interface Card, 3H0610 manual L E S H O O T

Troubleshooting

Step 3 : Install the NIC in the Printer.

(Ch1-ÓNIC Hardware InstallationÓ, Appendix-ÓNIC H/WÓ)

VeriÞy the NIC H/W when the Printer is ÒReadyÓ and ON the Network :

(Green ÒLinkÓ LED shoud be ON and Yellow ÒNetÓ LED should be BLINKING with net trafÞc.)

T R O

	3A : Green ÒLINKÓ LED ON ?
	(Network connectivity to Hub ?)
		No
Yes		Verify cabling, port, hub/switch, etc. :
		Does any other known working network
		device work OK when plugged into the
		same cable and port as the printer ?
		Yes
		NIC or Printer Defective :
		1) Replace NIC. Goto 3A
		2) If no difference with new NIC,
		Replace Printer. Go to 3A.

No	Fix network cabling,
	ports, etc. and go to 3A.

Refer to Appendix -

ÒTechnical AssistanceÓ

U B L E S H O O T

3B : Yellow ÒNETÓ LED ON ?

(Net TrafÞc detected ?)

Yes

No

Verify cabling, port, hub/switch, etc. : Does any other known working network device work OK when plugged into the same cable and port as the printer ?

Yes

NIC or Printer Defective :

1)Replace NIC. Goto 3A

2)If no difference with new NIC, Replace Printer. Go to 3A.

No	Fix network cabling,
	ports, etc. and go to 3A.

Refer to Appendix -

ÒTechnical AssistanceÓ

3C : Print NIC ConÞguration Test Page.

Goto Step 4 : ÒConÞgure the NICÓ

July 1998 12-3