Kodak Kodak 10/100 Network Interface Card, 3H0610 manual Bootp Server Application Messages

F

A S T M A N A G E

Windows - FastManage Configuration Utilities

3.11.5 BOOTP Server Application Messages

The following messages may appear while you are using the BOOTP Server Application.

BOOTP Server Application Messages

Problem	Cause	Solution
Please retry when there is a	No Bottleful found	Enter bootptab Þle and
bootptab Þle		retry.
IP is disabled in the Þle	IP discovery disabled	Enable IP Discovery in
issnmp.ini. For this	in the Discovery	the Discovery
application to run, enabled IP	Application	Application to enabled
		IP.
Error to read packet	A bad BOOTP packet	Retry. If the problem
	is received	persists, reset the
		device.
The address should contain	Validation for	Enter a valid Macintosh
only HEX digits. i.e., 0-9, and	Macintosh address	address.
A-F/(a-f)
Hardware address is not	Appears during the	Enter the Host name
speciÞed. So this entry cannot	operation ÒAdd entry	address in the user entry
be saved	to Bootptab ÞleÓ	form.
IP address is not speciÞed. So	Appears during the	Enter the IP address in
this entry cannot be save	operation ÒAdd entry	the user entry form.
	to Bootptab ÞleÓ
This is not a valid hardware	User input invalid	A valid hardware
address	Macintosh address	address is a 12-digit
		HEX number. For
		example:
		01.23.45.67.89.AB

3-36 July 1998