FUEL HANDLING
Mixing
•Always mix the petrol and oil in a clean container intended for fuel.
•Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.
•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.
•Do not mix more than one month’s supply of fuel at a time.
•If the machine is not used for some time the fuel tank should be emptied and cleaned.
! | WARNING! The catalytic converter | |
muffler gets very hot during and after | ||
| ||
| use. This also applies during idling. Be | |
| aware of the fire hazard, especially when | |
| working near flammable substances and/ | |
| or vapours. |
Fueling
! | WARNING! Taking the following | |
precautions, will lessen the risk of fire: | ||
|
Mix and pour fuel outdoors, where there are no sparks or flames.
Do not smoke or place hot objects near fuel.
Always shut off the engine before refuelling.
Always stop the engine and let it cool for a few minutes before refuelling.
When refuelling, open the fuel cap slowly so that any excess pressure is released gently.
Tighten the fuel cap carefully after refuelling.
Always move the machine away from the refuelling area and source before starting.
•Always use a fuel container with an
•If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.
•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.
•Ensure that the fuel is well mixed by shaking the container before filling the tank.
English – 17