GENERAL SAFETY PRECAUTIONS
Quick release
There is an easily accessible, quick release fitted at the front as a safety precaution in case the engine catches fire, or in any other situation that requires you to free yourself from the machine and harness. See instructions under the heading Adjusting the harness and brush cutter.
Check that the harness straps are correctly positioned. Once the harness and machine have been adjusted, check that the harness quick release works correctly.
Muffler
The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A muffler fitted with a catalytic converter is also designed to reduce harmful exhaust gases.
In countries that have a warm and dry climate there is a significant risk of fire. We therefore fit certain mufflers with a spark arrestor mesh. Check whether the muffler on your machine is fitted with this kind of mesh.
For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine.
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to the machine.
If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.
NOTE!
Make sure that the spark arrestor is screwed in place correctly.
! | WARNING! Mufflers fitted with catalytic | |
converters get very hot during use and | ||
| ||
| remain so for some time after stopping. | |
| This also applies at idle speed. Contact | |
| can result in burns to the skin. | |
| Remember the risk of fire! | |
! | WARNING! The inside of the muffler | |
contain chemicals that may be | ||
| ||
| carcinogenic. Avoid contact with these | |
| elements in the event of a damaged | |
| muffler. |
English – 9