KEY TO SYMBOLS
Symbols
WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
• A protective helmet where there is a risk of falling objects
• Approved hearing protection
•Approved eye protection
Max. speed of output shaft, rpm
10000 
Watch out for thrown objects and ricochets.
The operator of the machine must |
|
| |
ensure, while working, that no |
|
| |
persons or animals come closer | 15 m | 15 m | |
than 15 metres. | |||
50FT | 50FT |
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes into contact with a fixed object.This is called blade thrust. The blade is capable of amputating an arm or leg.
Always keep people and animals at least 15 metres from the machine.
Arrows which show limits for handle positioning.
Always wear approved protective gloves.
Wear sturdy,
Only use
Primer bulb
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in the Technical data chapter and on the label.
Other symbols/decals on the machine refer to special certification requirements for certain markets.
The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch
automatically returns to the start position. In order to prevent unintentional starting, the spark plug
cap must be removed from the spark plug when assembling, checking and/or performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
2 – English