Husqvarna 525 LST, 524 L, 966781601 manual General Safety Precautions, Personal protective equipment

Page 6

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!

The machine is only designed for trimming grass.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the ”Personal protective equipment” heading.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading.

All covers, guards and handles must be fitted before starting. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

Carry out an overall inspection of the machine before use. See the maintenance schedule.

WARNING! This machine produces an

! electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.

WARNING! Running an engine in a

! confined or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

!

WARNING! Never allow children to use or

be in the vicinity of the machine. As the

 

 

machine is equipped with a spring-

 

loaded stop switch and can be started by

 

low speed and force on the starter

 

handle, even small children under some

 

circumstances can produce the force

 

necessary to start the machine. This can

 

mean a risk of serious personal injury.

 

Therefore remove the spark plug cap

 

when the machine is not under close

 

supervision.

Personal protective equipment

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

!

WARNING! Listen out for warning signals

or shouts when you are wearing hearing

 

protection. Always remove your hearing

 

protection as soon as the engine stops.

HELMET

A protective helmet where there is a risk of falling objects

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with the ANSI Z87.1 standard in the USA or EN 166 in EU countries.

6 – English

Image 6
Contents 524 L 525 LST RJD 525 RS KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system Quick release MufflerCutting equipment Locking nutCutting equipment Sharpening grass knifes and grass blades Trimmer headAssembly Fitting the loop handle 524 L, 525 LST, 525 RJDFitting the handlebar 525 RS Assembling and dismantling the two-piece shaft 525 RJD AssemblyAssembling the cutting equipment Fitting the trimmer guard and trimmer headAdjusting the harness and brush cutter Fitting a blade guard, grass blade and grass cutterDismantling Correct height Standard harnessSpreading the load on your shoulders Correct balanceFuel safety Fuel HandlingFuel Muffler gets very hot during and after FuelingMixing Use. This also applies during idling. BeStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingBasic safety rules Working TechniquesGeneral working instructions Grass clearing using a grass blade Basic working techniquesGrass trimming with a trimmer head Cutting SweepingAdjustment of the idle speed MaintenanceBasic setting CarburettorAdjusting the start throttle speed MufflerTwo-piece shaft 525 RJD Cooling systemSpark plug Air filterCleaning the air filter Bevel gearMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataTechnical Data Super Auto Super Auto II Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x Alloy Original instructions 1155734-28