Section III. Replacing a lamp only

2.Toremovelightassembly,removethespecialpilotscrewattopoffacering,removelightassemblyfromniche,and place assembly on deck.

WARNING

Be sure to keep the special pilot screw from this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock.

3.Remove Junction Box cover, disconnect the light fixture wires,and pull the cord throughthe conduit.

4.Feed the new light fixture cord through the conduit from the niche to the Junction Box.

NOTE

Depending on the length of the conduit, special tools may be required to pull the cord through the conduit.

5.Leave at least 4 feet of cord to coil around the light fixture; see Figure 1. This 4 feet of cord coiled around the light allows the light to be serviced after the pool is filled with water.

6.Cut the cord at the Junction Box, leaving at least 6 inches of cord to make connections.

7.Strip 6 inches of the outer cord jacket from the cord to expose the three insulated wires – be careful not to damage theinsulationonthethreeinnerwires.

8.Connect all three wires to the corresponding circuit wires in the Junction Box (black wire to power, white wire to common, and green wire to ground) and secure the Junction Box cover in place.

WARNING

Never operate this underwater light for more than 10 seconds unless it is totally submerged in water. Without total submersion, the light assembly will get extremely hot, which may result in serious burns or in breakage of the lamp or lens. This may result in serious injury to pool users, installers, or bystanders, or in damage to property.

9. Replacelightassemblyintothenicheandtightenthespecialpilotscrew.

WARNING

Use only the special pilot screw provided with this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock.

10.Fillthepooluntiltheunderwaterlightiscompletelysubmergedinwaterbeforeoperatingthelightformorethan10 seconds.Turnonmainswitchorcircuitbreaker,aswellastheswitchwhichoperatestheunderwaterlightitself,to check for proper operation.

DANGER

Always disconnect power to the pool light at the circuit breaker before servicing the light. Failure to do so could result in death or serious injury to installer, serviceman, pool users or others due to electrical shock.

1.Turnoffmainelectricalswitchorcircuit breaker, as well as the switch which operatestheunderwaterlightitself.

2.Youwillneedtogetthefollowingitems:

a.A new lens gasket, p/n 79101601.

b.A lamp, see Table 1 for proper wattage and type.

Table1,LampSpecifications

Voltage	Wattage	No. Req.	Lamp type	P/N
120	300	1	T-3 R7S	79131000
120	500	1	T-3 R7S	79131100
12	50	2	T-3 GY 6.35	79131400
12	100	2	T-3 GY 6.35	79131200

Rev. D • Rev. D • Rév. D 10-29-07

P/N • Núm/Pte. • Réf. 99101600

AmerQuartz specifications

Pentair AmerQuartz is a leading player in the realm of high-performance water filtration solutions. Recognized for its innovative approach, Pentair AmerQuartz combines advanced technologies with engineering excellence, making it a trusted choice for a wide array of applications, including industrial, municipal, and commercial water treatment.

One of the standout features of Pentair AmerQuartz is its unique filtration media, which offers exceptional particle removal capabilities. The system employs a blend of graded granules designed to effectively capture sediment and other impurities, resulting in significantly improved water clarity and quality. This proprietary media not only enhances filtration efficiency but also extends the service life of the filter, reducing the need for frequent replacements and maintenance.

Another key characteristic of Pentair AmerQuartz is its versatility. The system can be tailored to meet specific filtration needs, regardless of the water source. Whether it’s treating potable drinking water, swimming pool water, or industrial effluent, AmerQuartz can efficiently adapt to varying flow rates and water conditions. This flexibility makes it an ideal solution for diverse environments, be it urban areas or remote locations.

Pentair AmerQuartz is also engineered with user convenience in mind. Its intuitive design facilitates easy installation and operation. Users can quickly monitor the system’s performance and maintenance needs through a user-friendly interface, ensuring ongoing optimal operation without excessive downtime.

Furthermore, the technology behind Pentair AmerQuartz incorporates advanced automation features. These technological advancements allow for real-time monitoring and control of the filtration process. Users can adjust parameters remotely and receive alerts for maintenance or anomalies, thereby optimizing efficiency and minimizing operational costs.

Sustainability is at the forefront of Pentair AmerQuartz's commitment to innovation. The systems are designed to minimize water waste and energy consumption, promoting environmentally responsible practices within water treatment processes.

In summary, Pentair AmerQuartz stands as a testament to cutting-edge design and effective engineering in the water treatment industry. With its advanced filtration capabilities, user-friendly features, and commitment to sustainability, it continues to set new standards for performance and reliability in water filtration solutions. Users can trust that with Pentair AmerQuartz, they are investing in a superior product that prioritizes both quality and efficiency.