Operation, Applications, Oxygenated Fuels

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes result- ing in possible serious injury.

FILLING TANK

Clean surface around fuel cap to prevent contam- ination.

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke! Failure to heed this warning could result in seri- ous personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Clear leaves and other debris from your lawn

Keeping decks and driveways free from grass clippings, leaves, pine needles, and other debris

FUELING AND REFUELING the blower

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline.

Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per gallon (US).

Do not use automotive lubricant or 2-cycle outboard

lubricant .

DO NOT mix quantities larger than usable in a 30 day period.

high quality 2-cycle engine lubricant

Gasoline	lubricant

1 gallon (US)	2.6 oz.
1 liter	20 cc (20 ml)

OXYGENATED FUELS

Some conventional gasolines are blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help reduce emissions.

If using an oxygenated fuel, make sure it is unleaded and meets the minimum octane rating requirements. Before using an oxygenated fuel, try to confirm the fuel’s contents. Some states/provinces require this information to be posted on the pump. The following are the EPA approved percentages of oxygenates:

Ethanol (ethyl or grain alcohol) 10% by volume. You may use gasoline containing up to 10% ethanol by volume. Gasoline containing ethanol may be marketed under the name “Gasohol.” Do not use E85 fuel.

MTBE (methyl tertiary butyl ether) 15% by volume. You may use gasoline containing up to 15% MTBE by volume.

Methanol (methyl or wood alcohol) 5% by volume. You may use gasoline containing up to 5% methanol by volume as long as it also contains cosolvents and corrosion inhibi- tors to protect the fuel system. Gasoline containing more than 5% methanol by volume may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of the product or your fuel system.

If you notice any undesirable operating symptoms, try anoth- er service station or switch to another brand of gasoline.

NOTE: Fuel system damage or performance problems re- sulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated previously are not covered under warranty.

9 — English

RY09701, RY09600 specifications

The Ryobi RY09600 and RY09701 are two notable additions to Ryobi's diverse line of outdoor power equipment, designed to enhance efficiency and ease of use for homeowners and professionals alike. These models are engineered with cutting-edge technology, focused on delivering performance and durability.

The Ryobi RY09600 is a robust string trimmer, equipped with a powerful 26cc, 2-cycle engine that provides ample power for tackling thick grass, weeds, and light brush. This compact trimmer features a lightweight design, making it easy to maneuver in tight spaces. The RY09600 comes with an automatic feed spool, ensuring a consistent cutting line length without the need for manual adjustments. Additionally, it features a comfort grip handle that reduces vibration and increases control, allowing for extended use without fatigue.

On the other hand, the Ryobi RY09701 is a versatile, gas-powered blower that boasts a powerful 26cc engine, designed for both professionals and DIY enthusiasts. This blower is capable of delivering air speeds of up to 150 mph, effectively clearing leaves, debris, and grass clippings from various surfaces. The RY09701 features a lightweight design, which minimizes strain during prolonged use. An adjustable speed trigger allows for tailored airflow control, providing the user with the flexibility to manage different tasks efficiently. The blower's ergonomic handle ensures comfort, making it easier to navigate around gardens and driveways.

Both models benefit from Ryobi’s commitment to innovation, utilizing advanced technologies such as Easy Start, which simplifies the starting process. This feature is particularly advantageous for users who may struggle with traditional starting mechanisms. Furthermore, their construction includes durable components, ensuring longevity even under rigorous use.

In summary, the Ryobi RY09600 and RY09701 are exemplary tools for any outdoor maintenance task, combining power, ease of use, and user-friendly designs. With their high-performance engines, thoughtful features, and ergonomic designs, these tools offer exceptional value, making yard work simpler and more efficient. Whether used for trimming or blowing, these models reflect Ryobi’s dedication to providing quality equipment for outdoor enthusiasts.