Maintenance, Resetting the Fuse, Lubrication

OPERATION

Lift the grass catcher by its handle to remove from mower.

Empty grass clippings.

Lift the rear door and reinstall the grass catcher as de- scribed earlier in this manual.

RESETTING THE FUSE

See Figure 13.

If the motor stops while you are cutting grass, you may need to reset the fuse. Press the reset button on the fuse key and try restarting the motor.

MAINTENANCE

WARNING:

Before performing any maintenance, make sure the mow- er battery and fuse key are removed to avoid accidental starting and possible serious personal injury.

WARNING:

When servicing, use only authorized replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

Periodically check all nuts and bolts for proper tightness to ensure safe operation of the mower.

Remove any buildup of grass and leaves on or around the motor cover. Wipe the mower clean with a dry cloth occa- sionally. Do not use water.

LUBRICATION

All of the bearings in this product are lubricated with a suf- ficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further bearing lubrication is required.

WARNING:

Always protect hands by wearing heavy gloves and/or wrapping the cutting edges of the blade with rags and other material when performing blade maintenance. Contact with the blade could result in serious personal injury.

REPLACING THE CUTTING BLADE

See Figure 14 - 15.

NOTE: Only use authorized replacement blades.

Stop the motor and remove the fuse key. Allow blade to come to a complete stop.

Remove the battery pack.

Turn the mower on its side.

Wedge a block of wood between the blade and mower deck to prevent the blade from turning.

Loosen the blade nut by turning it counterclockwise (as viewed from bottom of mower) using a 15 mm wrench or socket (not provided).

Remove the blade nut, spacer, blade insulator, and blade.

Make certain the fan assembly is pushed completely against the motor shaft.

Place the new blade on the shaft against the fan as- sembly. Ensure blade is properly seated with shaft go- ing through center blade hole and the two blade posts inserted into their respective holes on the blade. Make sure it is installed with the curved ends pointing up toward the mower deck and not down toward the ground. When seated properly, the blade should be flat against the fan assembly.

Replace the blade insulator and spacer, then thread the blade nut on the shaft and finger tighten.

NOTE: Make certain all parts are replaced in the exact order in which they were removed.

Torque the blade nut down clockwise using a torque wrench (not provided) to ensure the bolt is properly tight- ened. The recommended torque for the blade nut is 350- 400 in. lbs.

11 — English

RY14110 specifications

The Ryobi RY14110 is a versatile electric pressure washer designed for efficient cleaning tasks around the home and yard. With its robust performance, user-friendly features, and advanced technologies, it has quickly become a favorite among homeowners and DIY enthusiasts.

At the heart of the RY14110 is a powerful 2,000 PSI motor, capable of producing a flow rate of 1.2 gallons per minute. This combination makes it effective for tackling a wide range of cleaning applications, from washing vehicles and driveways to rinsing patios and decks. The electric motor not only enhances performance but also minimizes noise, making it a suitable option for residential areas.

One of the standout features of the Ryobi RY14110 is its ease of use. The unit is lightweight and comes equipped with a compact design, making it easy to transport and store. The integrated handle and wheels enhance mobility, allowing users to move the unit effortlessly across various surfaces.

The RY14110 also boasts a 25-foot high-pressure hose, providing ample reach for cleaning tasks without the need to constantly reposition the unit. The quick-connect nozzles further enhance versatility, offering four different spray patterns—0°, 15°, 25°, and soap. This adaptability allows users to customize the pressure and spray angle for different surfaces and cleaning needs.

Another impressive characteristic of the Ryobi RY14110 is its onboard storage for accessories. Users can conveniently store the included nozzles, hose, and cord, ensuring that everything is organized and easily accessible. This thoughtful design helps prevent the loss of essential components.

In terms of technology, the RY14110 features a leak-proof and garden hose connector, ensuring a tight fit and preventing water loss during use. This innovation not only improves efficiency but also prolongs the life of the unit by preventing wear and tear over time.

Lastly, the Ryobi RY14110 comes with a two-year warranty, providing peace of mind for users. Incorporating quality materials and engineering, the pressure washer is built to last and withstand the rigors of frequent use. In summary, the Ryobi RY14110 is a powerful, user-friendly electric pressure washer, ideal for homeowners seeking effective cleaning solutions without the hassle of gas-powered units. Its blend of features, technology, and durability make it an excellent addition to any cleaning arsenal.